Bluesolar MPPT 150/70 (12/24/36/48V-70A)

R10,777.00 R10,776.00


PV voltage up to 150 V
The BlueSolar MPPT 150/70 and 150/85 charge controllers will charge a lower nominal-voltage battery from a
higher nominal voltage PV array.
The controller will automatically adjust to a 12, 24, 36, or 48V nominal battery voltage.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller
will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to
slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible charge algorithm
Several preconfigured algorithms. One user programmable algorithm.
Manual or automatic equalisation.
Battery temperature sensor. Battery voltage sense option.
Programmable auxiliary relay
For alarm or generator start purposes
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
Reverse current protection.
CAN bus
To parallel up to 25 units, to connect to a ColorControl panel or to connect to a CAN bus network

Nominal battery voltage 12 / 24 / 36 / 48V Auto Select
Rated charge current 70A @ 40°C (104°F) 85A @ 40°C (104°F)
Maximum solar array input power 1) 12V: 1000W / 24V: 2000W / 36V: 3000W / 48V: 4000W 12V: 1200W / 24V: 2400W / 36V: 3600W / 48V: 4850W
Maximum PV open circuit voltage 150V absolute maximum coldest conditions
145V start-up and operating maximum
Minimum PV voltage Battery voltage plus 7 Volt to start Battery voltage plus 2 Volt operating
Standby power consumption 12V: 0,55W / 24V: 0,75W / 36V: 0,90W / 48V: 1,00W
Efficiency at full load 12V: 95% / 24V: 96,5% / 36V: 97% / 48V: 97,5%
Absorption charge 14.4 / 28.8 / 43.2 / 57.6V
Float charge 13.7 / 27.4 / 41.1 / 54.8V
Equalization charge 15.0 / 30.0 / 45 / 60V
Remote battery temperature sensor Yes
Default temperature compensation
setting -2,7 mV/°C per 2V battery cell
Remote on/off Yes
Programmable relay DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC
Communication port VE.Can: two paralleled RJ45 connectors, NMEA2000 protocol
Parallel operation Yes, through VE.Can. Max 25 units in parallel
Operating temperature -40°C to 60°C with output current derating above 40°C
Cooling Low noise fan assisted
Humidity (non condensing) Max. 95%
Terminal size 35mm² / AWG2
Material & color Aluminium, blue RAL 5012
Protection class IP20
Weight 4,2kg
Dimensions (h x w x d) 350 x 160 x 135mm
Mounting Vertical wall mount Indoor only
Safety EN/IEC 62109-1
EMC EN 61000-6-1, EN 61000-6-3
1) If more solar power is connected, the controller will limit input power to the stated maximum


There are no reviews yet.

Be the first to review “Bluesolar MPPT 150/70 (12/24/36/48V-70A)”